This is a nice rich brown filament that printed better than any other wood based filament I’ve had. The layer lines are near impossible to see and the stringing is minimal. ColorFabb is well respected but their price is on a high side. It’s too bad that the one review they have on Amazon does not match my experience at all. This filament is sold in 650g size on a plastic spool.
Recommended Print Settings
Temperatures
- Hot End - 210 Celsius
- Bed - 60 Celsius
Speeds
- Print Speed - 50mm/s
- First Layer Speed - 30mm/s
- Perimeter Speed - 30mm/s
- Infill Speed - 60mm/s
- Cooling Fan Speed - 100%
Structure
- Perimeters - 2 or 0.8mm - 1mm
- Top and Bottom Layers - 4 to 5 or 1mm
- Infill - 15%
Retraction
- Distance - 0.8mm*
- Speed - 35mm*
- Z-Lift - 0.6mm
Bridging
- Bridge Flow - 85%
- Bridge Speed - 30mm/s
- Bridge Cooling - 100%
Physical
- Bed Adhesion - Glue Stick
- Nozzle Type - Brass (Standard)
- Enclosure - None