Don’t be fooled by the name. This yellowish sandy color has no wood in it. However it does have a similar color to a fresh piece of pine. It does not appear to be sold on Mad Maker Filament. I will check Paramount 3D since they have a lot of light brown/tan colors.
It's really sad that Protoparadigm disappeared in the middle of the night. They had a very good earth tone and gem series of filaments. One of the owners and original creators of the filament is continuing the colors at MadMakerFilament.com. MadMaker is advertising a quality 3D850 HTPLA in their filaments. I must caution you that I do not have any direct buying experience with this new company but the owner responded quickly and thoroughly to my email. Protoparadigm was also known as 5 dollar filament and they may be returning with yet another name.
Recommended Print Settings
Temperatures
- Hot End - 210 Celsius
- Bed - 60 Celsius
Speeds
- Print Speed - 50mm/s
- First Layer Speed - 30mm/s
- Perimeter Speed - 30mm/s
- Infill Speed - 60mm/s
- Cooling Fan Speed - 100%
Structure
- Perimeters - 2 or 0.8mm - 1mm
- Top and Bottom Layers - 4 to 5 or 1mm
- Infill - 15%
Retraction
- Distance - 0.8mm*
- Speed - 35mm*
- Z-Lift - 0.6mm
Bridging
- Bridge Flow - 85%
- Bridge Speed - 30mm/s
- Bridge Cooling - 100%
Physical
- Bed Adhesion - Glue Stick
- Nozzle Type - Brass (Standard)
- Enclosure - None