Proto-Pasta Matte Fiber Green is a deep forest green. Trees, Forests, Clovers, Frogs, or your next Jurassic adventure. The matte HTPLA has a rough texture before and after printing. It does string a little bit, but if you are tired of all your prints being shiny, this is the answer. Proto-Pasta Matte Fiber HTPLA comes on a 500g cardboard spool.

Matte Fiber HTPLA – Green

Recommended Print Settings

Temperatures

  • Hot End - 210 Celsius
  • Bed - 60 Celsius

Speeds

  • Print Speed - 50mm/s
  • First Layer Speed - 30mm/s
  • Perimeter Speed - 30mm/s
  • Infill Speed - 60mm/s
  • Cooling Fan Speed - 100%

Structure

  • Perimeters - 2 or 0.8mm - 1mm
  • Top and Bottom Layers - 4 to 5 or 1mm
  • Infill - 15%

Retraction

  • Distance - 0.8mm*
  • Speed - 35mm*
  • Z-Lift - 0.6mm

Bridging

  • Bridge Flow - 85%
  • Bridge Speed - 30mm/s
  • Bridge Cooling - 100%

Physical

  • Bed Adhesion - Glue Stick
  • Nozzle Type - Brass (Standard)
  • Enclosure - None
* Values will differ for printers with Bowden extruders
Tagged , ,

Leave a Reply

Your email address will not be published. Required fields are marked *