MOLDLAY is a filament specifically designed for mold making. It has a wax like feel to it and it prints at a lower temperature than normal PLA. Overall this filament prints very easy. The aqua is more of a ghostly translucent heather blue. MoldLay is sold in 750g sizes on a plastic spool. MoldLay Aqua is UV sensitive.
https://www.matterhackers.com/store/l/moldlay-filament-1.75mm/sk/MFN5WDLE
Recommended Print Settings
Temperatures
- Hot End – 175 Celsius
- Bed – 60 Celsius
Speeds
- Print Speed – 50mm/s
- First Layer Speed – 30mm/s
- Perimeter Speed – 30mm/s
- Infill Speed – 60mm/s
- Cooling Fan Speed – 100%
Structure
- Perimeters – 2 or 0.8mm – 1mm
- Top and Bottom Layers – 4 to 5 or 1mm
- Infill – 15%
Retraction
- Distance – 0.8mm*
- Speed – 35mm*
- Z-Lift – 0.6mm
Bridging
- Bridge Flow – 85%
- Bridge Speed – 30mm/s
- Bridge Cooling – 100%
Physical
- Bed Adhesion – Glue Stick
- Nozzle Type – Brass (Standard)
- Enclosure – None