Cheap3DFilaments Red PLA is a bright red similar to an LED red. When measuring the filament I noticed it seemed a little thin. About 1.73mm. But thats still within a tolerable range and it printed quite well. Cheap3DFilaments comes in 1kg sizes on plastic spools.
https://cheap3dfilaments.com/pla/14-red-pla-filament.html
Recommended Print Settings
Temperatures
- Hot End - 210 Celsius
- Bed - 60 Celsius
Speeds
- Print Speed - 50mm/s
- First Layer Speed - 30mm/s
- Perimeter Speed - 30mm/s
- Infill Speed - 60mm/s
- Cooling Fan Speed - 100%
Structure
- Perimeters - 2 or 0.8mm - 1mm
- Top and Bottom Layers - 4 to 5 or 1mm
- Infill - 15%
Retraction
- Distance - 0.8mm*
- Speed - 35mm*
- Z-Lift - 0.6mm
Bridging
- Bridge Flow - 85%
- Bridge Speed - 30mm/s
- Bridge Cooling - 100%
Physical
- Bed Adhesion - Glue Stick
- Nozzle Type - Brass (Standard)
- Enclosure - None