This Sapphire Blue is a very dark rich blue for a translucent filament. It has a slight hint of green but definitely is a color I would buy again. Atomic PETG prints easy but I recommend using a glue stick on PEI. Atomic filament is made in the USA. Its sold in 1kg sizes on a plastic spool.
Recommended Print Settings
Temperatures
- Hot End - 240 Celsius
- Bed - 85 Celsius
Speeds
- Print Speed - 50mm/s
- First Layer Speed - 30mm/s
- Perimeter Speed - 30mm/s
- Infill Speed - 60mm/s
- Cooling Fan Speed - 30-80%
Structure
- Perimeters - 2 or 0.8mm - 1mm
- Top and Bottom Layers - 4 to 5 or 1mm
- Infill - 15%
Retraction
- Distance - 0.8mm*
- Speed - 35mm*
- Z-Lift - 0.6mm
Bridging
- Bridge Flow - 85%
- Bridge Speed - 30mm/s
- Bridge Cooling - 80%
Physical
- Bed Adhesion - Glue Stick (Required on PEI)
- Nozzle Type - Brass (Standard)
- Enclosure - None