This is a decent gold color with a hint of glitter to give it an extra shine. 3DJake is a European store with its own brand of filament. Whether you are in the US or elsewhere in the world, the prices are very good.
The only issue with being outside of the EU is the shipping is very slow. Mine took 1 month to arrive from the day it was shipped. The samples I received were in a sealed package however the wrappers had small holes in them. 3D Jake sells their filament in 750G sizes on a plastic spool.
https://www.3djake.com/3djake/pla-gold-1
Recommended Print Settings
Temperatures
- Hot End - 210 Celsius
- Bed - 60 Celsius
Speeds
- Print Speed - 50mm/s
- First Layer Speed - 30mm/s
- Perimeter Speed - 30mm/s
- Infill Speed - 60mm/s
- Cooling Fan Speed - 100%
Structure
- Perimeters - 2 or 0.8mm - 1mm
- Top and Bottom Layers - 4 to 5 or 1mm
- Infill - 15%
Retraction
- Distance - 0.8mm*
- Speed - 35mm*
- Z-Lift - 0.6mm
Bridging
- Bridge Flow - 85%
- Bridge Speed - 30mm/s
- Bridge Cooling - 100%
Physical
- Bed Adhesion - Glue Stick
- Nozzle Type - Brass (Standard)
- Enclosure - None