This is a beautiful aqua blue which looks like a shimmering pool on a hot summer day. Taulman T-Glase is challenging to print. The settings below are a start, but there are still issues to work out. T-Glase Aqua is UV sensitive. I strongly recommend using glue stick on PEI beds. Taulman T-Glase is sold in 1 pound weights on a plastic spool.
Recommended Print Settings
Temperatures
- Hot End – 240 Celsius
- Bed – 90 Celsius
Speeds
- Print Speed – 50mm/s
- First Layer Speed – 30mm/s
- Perimeter Speed – 30mm/s
- Infill Speed – 60mm/s
- Cooling Fan Speed – 30-80%
Structure
- Perimeters – 2 or 0.8mm – 1mm
- Top and Bottom Layers – 4 to 5 or 1mm
- Infill – 15%
Retraction
- Distance – 0.8mm*
- Speed – 35mm*
- Z-Lift – 0.6mm
Bridging
- Bridge Flow – 85%
- Bridge Speed – 30mm/s
- Bridge Cooling – 80%
Physical
- Bed Adhesion – Glue Stick (Required)
- Nozzle Type – Brass (Standard)
- Enclosure – None
* Values will differ for printers with Bowden extruders