This yellow PLA is very bright. It at first seems like a lemon yellow but I discovered it’s very reactive to UV light. In the third photo I lowered the exposure just so the camera can capture it. This would work very well for printing a bracelet for a party, a fast car, or a bright safety sign. SnoLabs PLA comes on plastic 1kg spools. SnoLabs prints very well, the overhangs are some of the best I’ve seen on PLA.
SnoLabs provided a sample roll to help this site grow.
https://snolabs.com/yellow-1-75-pla/
Recommended Print Settings
Temperatures
- Hot End - 210 Celsius
- Bed - 60 Celsius
Speeds
- Print Speed - 50mm/s
- First Layer Speed - 30mm/s
- Perimeter Speed - 30mm/s
- Infill Speed - 60mm/s
- Cooling Fan Speed - 100%
Structure
- Perimeters - 2 or 0.8mm - 1mm
- Top and Bottom Layers - 4 to 5 or 1mm
- Infill - 15%
Retraction
- Distance - 0.8mm*
- Speed - 35mm*
- Z-Lift - 0.6mm
Bridging
- Bridge Flow - 85%
- Bridge Speed - 30mm/s
- Bridge Cooling - 100%
Physical
- Bed Adhesion - Glue Stick
- Nozzle Type - Brass (Standard)
- Enclosure - None