This is a nice bubblegum pink PLA. It’s a beautiful shade of pink that’s well saturated, not too dark and not too light. I like this shade of pink so much that this is my reference pink PLA. SnoLabs PLA comes on plastic 1kg spools. SnoLabs prints very well, the overhangs are some of the best I’ve seen on PLA.
SnoLabs provided a sample roll to help this site grow.
https://snolabs.com/pink-1-75-pla/
Recommended Print Settings
Temperatures
- Hot End - 210 Celsius
- Bed - 60 Celsius
Speeds
- Print Speed - 50mm/s
- First Layer Speed - 30mm/s
- Perimeter Speed - 30mm/s
- Infill Speed - 60mm/s
- Cooling Fan Speed - 100%
Structure
- Perimeters - 2 or 0.8mm - 1mm
- Top and Bottom Layers - 4 to 5 or 1mm
- Infill - 15%
Retraction
- Distance - 0.8mm*
- Speed - 35mm*
- Z-Lift - 0.6mm
Bridging
- Bridge Flow - 85%
- Bridge Speed - 30mm/s
- Bridge Cooling - 100%
Physical
- Bed Adhesion - Glue Stick
- Nozzle Type - Brass (Standard)
- Enclosure - None