Repkord Red PLA is a imperial red which represents passion. Repkord PLA prints very well. I was able to push my printer to max speed and the filament kept up. Repkord doesn’t sell individual rolls but makes multi color packs. The multi-colors come on half pound plastic spools with individual ziplock bags to keep the spools fresh. If you are new to 3D printing or just use some colors occasionally the Repkord multipacks are an amazing choice. You can get a 4 color pack or an 8 color pack like a classic box of crayons.
4-Color: https://amzn.to/2E4ccgw
8-Color: https://amzn.to/2zWRw63
Recommended Print Settings
Temperatures
- Hot End - 210 Celsius
- Bed - 60 Celsius
Speeds
- Print Speed - 50mm/s
- First Layer Speed - 30mm/s
- Perimeter Speed - 30mm/s
- Infill Speed - 60mm/s
- Cooling Fan Speed - 100%
Structure
- Perimeters - 2 or 0.8mm - 1mm
- Top and Bottom Layers - 4 to 5 or 1mm
- Infill - 15%
Retraction
- Distance - 0.8mm*
- Speed - 35mm*
- Z-Lift - 0.6mm
Bridging
- Bridge Flow - 85%
- Bridge Speed - 30mm/s
- Bridge Cooling - 100%
Physical
- Bed Adhesion - Glue Stick
- Nozzle Type - Brass (Standard)
- Enclosure - None