Proto-Pasta Matte Fiber Green is a deep forest green. Trees, Forests, Clovers, Frogs, or your next Jurassic adventure. The matte HTPLA has a rough texture before and after printing. It does string a little bit, but if you are tired of all your prints being shiny, this is the answer. Proto-Pasta Matte Fiber HTPLA comes on a 500g cardboard spool.
Recommended Print Settings
Temperatures
- Hot End - 210 Celsius
- Bed - 60 Celsius
Speeds
- Print Speed - 50mm/s
- First Layer Speed - 30mm/s
- Perimeter Speed - 30mm/s
- Infill Speed - 60mm/s
- Cooling Fan Speed - 100%
Structure
- Perimeters - 2 or 0.8mm - 1mm
- Top and Bottom Layers - 4 to 5 or 1mm
- Infill - 15%
Retraction
- Distance - 0.8mm*
- Speed - 35mm*
- Z-Lift - 0.6mm
Bridging
- Bridge Flow - 85%
- Bridge Speed - 30mm/s
- Bridge Cooling - 100%
Physical
- Bed Adhesion - Glue Stick
- Nozzle Type - Brass (Standard)
- Enclosure - None