This is a very light grey color and is nearly identical to Paramount 3D Gray PLA. Its so identical that I have to hold both under several light sources to see the difference. This grey is slightly darker. It has a Pantone code of 423C. (Please stand by while I make sure my photos for these nearly identical colors are correct).
Paramount 3D has one of the widest ranges of colors available. This made in the USA filament prints well and is the go-to filament for unique color choice. Paramount uses some of the coolest names for its filaments. Paramount also includes the Pantone codes with each filament. Paramount 3D is usually sold in 1KG rolls on a plastic spool.
Recommended Print Settings
Temperatures
- Hot End - 210 Celsius
- Bed - 60 Celsius
Speeds
- Print Speed - 50mm/s
- First Layer Speed - 30mm/s
- Perimeter Speed - 30mm/s
- Infill Speed - 60mm/s
- Cooling Fan Speed - 100%
Structure
- Perimeters - 2 or 0.8mm - 1mm
- Top and Bottom Layers - 4 to 5 or 1mm
- Infill - 15%
Retraction
- Distance - 0.8mm*
- Speed - 35mm*
- Z-Lift - 0.6mm
Bridging
- Bridge Flow - 85%
- Bridge Speed - 30mm/s
- Bridge Cooling - 100%
Physical
- Bed Adhesion - Glue Stick
- Nozzle Type - Brass (Standard)
- Enclosure - None