This is a wonderful saturated orange color. Energized like a tiger ready to strike, prints will be ferocious.
Mamorubot comes in 1kg sizes on a perfectly wound plastic roll. This filament prints very well. However it is near impossible to find in the US.
https://www.sr3dprints.co.uk/store/Orange-MAMORUBOT-PLA-1-75mm-3D-Printer-Filament-p100901720
Recommended Print Settings
Temperatures
- Hot End - 210 Celsius
- Bed - 60 Celsius
Speeds
- Print Speed - 50mm/s
- First Layer Speed - 30mm/s
- Perimeter Speed - 30mm/s
- Infill Speed - 60mm/s
- Cooling Fan Speed - 100%
Structure
- Perimeters - 2 or 0.8mm - 1mm
- Top and Bottom Layers - 4 to 5 or 1mm
- Infill - 15%
Retraction
- Distance - 0.8mm*
- Speed - 35mm*
- Z-Lift - 0.6mm
Bridging
- Bridge Flow - 85%
- Bridge Speed - 30mm/s
- Bridge Cooling - 100%
Physical
- Bed Adhesion - Glue Stick
- Nozzle Type - Brass (Standard)
- Enclosure - None