Sun Punch Yellow looks amazing. It’s a bright yellow but is not fluorescent so it won’t look out of place with other light colored filaments. This fun yellow can be used for some toys such as construction vehicles.
Maker PLA Filament – 1.75mm – Sun Punch Yellow 1kg
Recommended Print Settings
Temperatures
- Hot End - 210 Celsius
- Bed - 60 Celsius
Speeds
- Print Speed - 50mm/s
- First Layer Speed - 30mm/s
- Perimeter Speed - 30mm/s
- Infill Speed - 60mm/s
- Cooling Fan Speed - 100%
Structure
- Perimeters - 2 or 0.8mm - 1mm
- Top and Bottom Layers - 4 to 5 or 1mm
- Infill - 15%
Retraction
- Distance - 0.8mm*
- Speed - 35mm*
- Z-Lift - 0.6mm
Bridging
- Bridge Flow - 85%
- Bridge Speed - 30mm/s
- Bridge Cooling - 100%
Physical
- Bed Adhesion - Glue Stick
- Nozzle Type - Brass (Standard)
- Enclosure - None
MakerGeeks shut down in Feb 2019. Have you ever considered reviewing Atomic Filament? I am curious to see how the yellow compares. I’ve tried Matter Hackers and Hatchbox yellow and it was too watery.