Racy Red PLA is a hot fire engine red. Its a fierce color which can make your prints look hotter than the others. Next time you need to spice it up, this saturated red will deliver. This color reacts slightly to UV light.
Maker Geeks is a made in USA filament with free shipping for all orders to the US. They have a wide selection and offer everything from PLA, ABS, PETG, TPU (flex), and specialty filaments. Maker Geeks is sold in 1KG sizes on plastic spools. They also offer Grab Bag filaments at discount and a monthly 2 roll subscription.
Recommended Print Settings
Temperatures
- Hot End - 210 Celsius
- Bed - 60 Celsius
Speeds
- Print Speed - 50mm/s
- First Layer Speed - 30mm/s
- Perimeter Speed - 30mm/s
- Infill Speed - 60mm/s
- Cooling Fan Speed - 100%
Structure
- Perimeters - 2 or 0.8mm - 1mm
- Top and Bottom Layers - 4 to 5 or 1mm
- Infill - 15%
Retraction
- Distance - 0.8mm*
- Speed - 35mm*
- Z-Lift - 0.6mm
Bridging
- Bridge Flow - 85%
- Bridge Speed - 30mm/s
- Bridge Cooling - 100%
Physical
- Bed Adhesion - Glue Stick
- Nozzle Type - Brass (Standard)
- Enclosure - None