This yellowish-green light tan color is beautiful. It does shine quite a bit but printing at a lower temperature can sometimes help. Khaki is traditionally a military color so print some vehicles, soldiers, or toy weapons.
HTPLA Raptor – High Performance PLA 3D Filament – Non-Khaki, Khaki – 1.75mm – 1KG
Recommended Print Settings
Temperatures
- Hot End - 210 Celsius
- Bed - 60 Celsius
Speeds
- Print Speed - 50mm/s
- First Layer Speed - 30mm/s
- Perimeter Speed - 30mm/s
- Infill Speed - 60mm/s
- Cooling Fan Speed - 100%
Structure
- Perimeters - 2 or 0.8mm - 1mm
- Top and Bottom Layers - 4 to 5 or 1mm
- Infill - 15%
Retraction
- Distance - 0.8mm*
- Speed - 35mm*
- Z-Lift - 0.6mm
Bridging
- Bridge Flow - 85%
- Bridge Speed - 30mm/s
- Bridge Cooling - 100%
Physical
- Bed Adhesion - Glue Stick
- Nozzle Type - Brass (Standard)
- Enclosure - None