HyVISION Systems Snow White PLA – Made by iRV Tech

This filament seems to be hard to find now. However since HyVISION marked the manufacturer on the roll, it may be possible to find it from the manufacturer. HyVISION seems more focused on industrial products these days. It’s too bad as the HyVISION spools are one of the best designs out there.

Alternative Snow White PLA: https://amzn.to/2Vfm9w2

Recommended Print Settings

Temperatures

• Hot End - 210 Celsius
• Bed - 60 Celsius

Speeds

• Print Speed - 50mm/s
• First Layer Speed - 30mm/s
• Perimeter Speed - 30mm/s
• Infill Speed - 60mm/s
• Cooling Fan Speed - 100%

Structure

• Perimeters - 2 or 0.8mm - 1mm
• Top and Bottom Layers - 4 to 5 or 1mm
• Infill - 15%

Retraction

• Distance - 0.8mm*
• Speed - 35mm*
• Z-Lift - 0.6mm

Bridging

• Bridge Flow - 85%
• Bridge Speed - 30mm/s
• Bridge Cooling - 100%

Physical

• Bed Adhesion - Glue Stick
• Nozzle Type - Brass (Standard)
• Enclosure - None