This Orange started it all for me. While on a quest to find the perfect ‘Prusa’ Orange in PLA, I tried many brands. This is my reference orange color. This color slightly reacts to UV light.
AIO Robotics has to be one of the most consistent brands I have ever used. Another great thing about AIO is the spools are sold in half kilogram sizes. For a color which you may not need to use a lot, these smaller rolls will save you money. They also store easier and each come in a resealable bag. AIO Robotics often has colors out of stock. Watch out, AIO had older 1KG sizes on Amazon. They reportedly don't have the same quality. Perhaps due to age.
Recommended Print Settings
Temperatures
- Hot End - 210 Celsius
- Bed - 60 Celsius
Speeds
- Print Speed - 50mm/s
- First Layer Speed - 30mm/s
- Perimeter Speed - 30mm/s
- Infill Speed - 60mm/s
- Cooling Fan Speed - 100%
Structure
- Perimeters - 2 or 0.8mm - 1mm
- Top and Bottom Layers - 4 to 5 or 1mm
- Infill - 15%
Retraction
- Distance - 0.8mm*
- Speed - 35mm*
- Z-Lift - 0.6mm
Bridging
- Bridge Flow - 85%
- Bridge Speed - 30mm/s
- Bridge Cooling - 100%
Physical
- Bed Adhesion - Glue Stick
- Nozzle Type - Brass (Standard)
- Enclosure - None