3DXTech Max G prints very well. This amazing color looks like a green jolly rancher. The Xenomorph name is also very cool. 3DXTech has offers the most advanced filaments I’ve seen offered such as PEEK and PEI. 3DXTech sells regular filaments on plastic spools in 1kg quantities. Advanced filaments which can be very expensive are sold in smaller quantities.
https://www.3dxtech.com/max-g-petg-3d-filament-1-kg/
Recommended Print Settings
Temperatures
- Hot End - 240 Celsius
- Bed - 85Â Celsius
Speeds
- Print Speed - 50mm/s
- First Layer Speed - 30mm/s
- Perimeter Speed - 30mm/s
- Infill Speed - 60mm/s
- Cooling Fan Speed - 30-80%
Structure
- Perimeters - 2 or 0.8mm - 1mm
- Top and Bottom Layers - 4 to 5 or 1mm
- Infill - 15%
Retraction
- Distance - 0.8mm*
- Speed - 35mm*
- Z-Lift - 0.6mm
Bridging
- Bridge Flow - 85%
- Bridge Speed - 30mm/s
- Bridge Cooling - 80%
Physical
- Bed Adhesion - Glue Stick (Required on PEI)
- Nozzle Type - Brass (Standard)
- Enclosure - None