3D Fuel Fire Engine Red is a super saturated Red PLA. Its quite a challenge for cameras and monitors to represent saturated reds and orange colors even with advanced color tools like the X-Rite ColorChecker Passport. This is a great color and the filament is one of the more advanced filaments available. This PLA is a high heat and can be annealed to rival the performance of ABS. 3D Fuel Pro PLA is made with Natureworks Ingeo 3D850 resin. It is sold in 1kg rolls on plastic spools.
Recommended Print Settings
Temperatures
- Hot End - 210 Celsius
- Bed - 60 Celsius
Speeds
- Print Speed - 50mm/s
- First Layer Speed - 30mm/s
- Perimeter Speed - 30mm/s
- Infill Speed - 60mm/s
- Cooling Fan Speed - 100%
Structure
- Perimeters - 2 or 0.8mm - 1mm
- Top and Bottom Layers - 4 to 5 or 1mm
- Infill - 15%
Retraction
- Distance - 0.8mm*
- Speed - 35mm*
- Z-Lift - 0.6mm
Bridging
- Bridge Flow - 85%
- Bridge Speed - 30mm/s
- Bridge Cooling - 100%
Physical
- Bed Adhesion - Glue Stick
- Nozzle Type - Brass (Standard)
- Enclosure - None