While I’m not a fan of what seems like a gimmick, this filament looks amazing. Dare I say that this is the best printing filament I have tried yet? For something made from ‘beer’ these are some sharp edges for my aggressive print speeds. Buzzed is a golden brown color with darker brown specks for a truly unique look. It is so unique I didn’t have any browns to compare it to so I compared it with a selection of gold filament. Please note that 3D-Fuel says buzzed can vary in color due to the natural sources of color. 3D Fuel Buzzed is sold in 500g sizes on plastic spools.
Recommended Print Settings
Temperatures
- Hot End - 210 Celsius
- Bed - 60 Celsius
Speeds
- Print Speed - 50mm/s
- First Layer Speed - 30mm/s
- Perimeter Speed - 30mm/s
- Infill Speed - 60mm/s
- Cooling Fan Speed - 100%
Structure
- Perimeters - 2 or 0.8mm - 1mm
- Top and Bottom Layers - 4 to 5 or 1mm
- Infill - 15%
Retraction
- Distance - 0.8mm*
- Speed - 35mm*
- Z-Lift - 0.6mm
Bridging
- Bridge Flow - 85%
- Bridge Speed - 30mm/s
- Bridge Cooling - 100%
Physical
- Bed Adhesion - Glue Stick
- Nozzle Type - Brass (Standard)
- Enclosure - None