3D-Fuel Autumn Orange would work very well for a pumpkin, halloween treat, Harley Davidson logo. This color is listed as limited edition so get it while you can. The APLA is a little more challenging to print but worth the extra effort. If you have trouble printing, just try slowing down your speed and adding 5 more degrees to your hotend. 3D-Fuel is sold on 1KG plastic spools. 3D Fuel is produced in the US and Ireland so it should be readily available.
I can’t find this limited edition color but you can find other workday PLA here: https://amzn.to/2r7F5PX
Recommended Print Settings
Temperatures
- Hot End – 220 Celsius
- Bed – 60 Celsius
Speeds
- Print Speed – 40mm/s
- First Layer Speed – 25mm/s
- Perimeter Speed – 25mm/s
- Infill Speed – 50mm/s
- Cooling Fan Speed – 100%
Structure
- Perimeters – 2 or 0.8mm – 1mm
- Top and Bottom Layers – 4 to 5 or 1mm
- Infill – 15%
Retraction
- Distance – 0.8mm*
- Speed – 35mm*
- Z-Lift – 0.6mm
Bridging
- Bridge Flow – 85%
- Bridge Speed – 30mm/s
- Bridge Cooling – 100%
Physical
- Bed Adhesion – Glue Stick
- Nozzle Type – Brass (Standard)
- Enclosure – None
* Values will differ for printers with Bowden extruders